Waaree bifacial DCR 535/540 Watt

Waaree bifacial DCR 535/540 Watt About

Key Specifications

Performance & Special Features

• Because of bifacial design, rear side light & reflection can add extra energy yield depending heavily on installation (albedo, tilt, height above ground, etc.).

• Improved shade tolerance, split junction box for better heat dissipation.

• Uses large format / half-cut mono PERC cells, enhancing durability and reducing resistive losses.

Pros

• Good power for a single panel (535/540 W) fewer panels needed for a given capacity.

• DCR compliance makes it eligible for government schemes / subsidies.

• Built robustly (thermal range, IP68 junction box, sturdy frame) reliable under various weather conditions.

• Long output warranty ensures long-term performance.

Considerations / Limitations

• Panel is large and heavy (32.5 kg), so mounting, transport, structural support must be adequate.

• To realize bifacial gain, installation must allow rear reflection (ground reflectivity, tilt, spacing). If roof or ground is dark/absorbing, extra gain may be small.

• Higher initial cost vs simpler (non-bifacial) modules.

• Real world power will be lower than STC, especially under high temperatures, so temperature coefficient matters. (Exact coefficient not always clearly noted in all summary specs.)

• Check compatibility of inverter strings (voltage/current) especially Voc at lower temperatures, to prevent overvoltage issues.